FMJ A49

A49 uses the best quality components and engineering practice

Features & Specifications

Drawing on the many years of amplifier design experience at Arcam, the A49 uses the best quality components and engineering practice to produce a product that will give many years of musical pleasure and reliable service. With a class G amplifier, toroidal based power supply, acoustically damped chassis, paralleled transistor output stages and exceptionally low levels of distortion and noise the A49 is capable of reproducing music with all its original authority and detail.

The A49 features dual mono volume controls and a balanced signal path all the way though the product together with distortion nulling input multiplexers. Rest assured you will be hearing the music just as the artist intended. The A49 has been designed to leapfrog the competition with a massive 200 watts per channel into 8 ohms and 400 into 4 ohms. It delivers 50 watts in pure class A mode while allowing for huge extra power reserves from our latest generation class G topology that is both clever and efficient.

During normal operation, distortion is measured in less than one part per million so that this massive power is deliver with total control and finesse. There have been great strides made in improving audio sources and loudspeakers in recent years and the time is right to match them in the field of amplifier design. This ground breaking amplifier is a must audition amplifier for music lovers who understand that power is nothing without control.

Continuous power output, per channel, 8Ω

Both channels driven, 8Ω.20Hz-20kHz, 0.2% THD-200W, Single, 4Ω, at 1kHz 400W

Inputs Phono (MM) cartridge

Input sensitivity at 1kHz 5mV, Input impedance 47kΩ+100pF, Frequency reponse (ref. RIAA curve) 20Hz 0kHz +/- 1dB, Signal/noise ratio (Awtd) 50W, ref. 5mV input 80dB, Overload margin, 5mV at 1kHz 20dB

Inputs

Nominal sensitivity 1V (RCA), 2V (XLR), Input impedance 10kΩ, Maximum iput 8V (RCA), 15V (XLR), Frequency response 20Hz-20kHz +/- 0.05dB, Signal/noise ratio (Awtd) 50W, ref 1V/2V input 105dB

Preamplifier Output

Nominal output level 1.15V (RCA), 2.3V (XLR), Output impedance - 47Ω (RCA), 200Ω (XLR)

Headphones output

Maximum output level into 600Ω 4Vrms, Output impedance - 1Ω, Load range - 16Ω-2kΩ

General

Power consumption(standby)-<0.5W

Dimensions & Weights

W x D (inc. speaker terminals) x H (inc. feet) 433 x 425 x 171mm, Weight (net) 19.7kg, Weight (packed) 21.4kg