GO12SW

Inground Subwoofer with 12 inch driver

Features & Specifications

Inground Subwoofer with 12" driver

The GO12SW features a woofer with low-heat design is vented through the “chimney,” providing a constant flow of fresh air while always protecting the system from harsh weather and water. The flared chimney port system, combined with our polypropylene cone woofer with a high-intensity magnet structure, delivers deep, musical bass without chuffing or extraneous vibration. Bury the subwoofer nearby, or install it under your decking, and rock the very ground beneath your feet!

Design

Inground subwoofer with single high excursion driver (band-pass), 5/8” (14.3 cm) thick high-density polyethylene (HDPE) enclosure

Frequency Response
On-Axis

±3 dB from 28 - 120 Hz

Low Frequency Driver

12" (31cm) high compliance, mica-filled polypropylene with stitched Nitrile-Butadiene Rubber (NBR) surround, 2.5" high-power oversized voice coil, 4-layer on fiberglass bobbin

Low Frequency Extension

26 Hz

Sensitivity
Room / Anechoic

91 dB / 85 dB

Impedance

8 ohms

Suitable Amplifier Power Range

15 - 1000 watts

Maximum Input Power

500 watts

Finishes

Textured Copper Color (canopy only)

Weight

62 lbs. (28.1 kg)

Dimensions
HxWxD

33" × " × 35"
(83.8cm × cm × 88.9cm)