PDR W100
Wireless transmitter included! 10-inch single driver, bass-reflex, high-velocity low-turbulenceFeatures & Specifications
Built-In High-Power, High-Performance Discrete Amplifiers provide tremendous high-current, low-distortion power: 360 watts Dynamic Peak / 120 watts RMS.
Superior Reinforced Polymer-Composite Cones provide articulate and extended bass performance with tremendous output and superb control.
High-Velocity Low-Noise Dual Rear Ports with critically flared openings ensure maximum bass efficiency and minimum turbulence distortion.
Design | Single driver, bass reflex, high-velocity low-turbulence resistive port, built-in amplifier |
Amplifier | 360 watts Dynamic Peak / 120 watts RMS |
Amplifier Features | Auto-On / Standby, soft clipping |
Low Pass Filter Frequency | Variable 35 Hz - 150 Hz; Bypass Option |
Low Frequency Driver | 254-mm (10 in) reinforced polymer-composite cone, 38-mm (1-1/2 in) voice-coil |
Low Frequency Extension | 29 Hz (DIN) |
Sub / Sat Phase Alignment | Variable 0° - 180° |
Finishes | Black Ash |
Inputs | Two RCA (L/R-Mono) for L/R Line-Out or Sub-Out / LFE-Out of receiver, processor or other line-level source |
Weight | 29 lbs. (13.2 kg) |
Dimensions HxWxD Includes grilles and feet |
15.5" × 13.125" × 15.25" (39.4cm × 33.3cm × 38.7cm) |
Wireless Band | 2.4 GHz |
Latency | 13 ms |
Maximum Wireless Range | 15' / 50m |
Sampling Rate | 48 kHz, 16 bits |
Subs Per Transmitter | 1 |