Seismic 110
Single high-excursion driver, sealed enclosure, patented built-in Ultra-Class-D powerFeatures & Specifications
Seismic™ 110: Alpha Dog of Compact Industrial Design Subwoofers
Design innovation for maximum performance from a minimal footprint! A true collaboration between industrial, mechanical, electronic and acoustic design.
Unlike many subwoofers on the market, Seismic™ 110 has no off-the-shelf parts. A completely custom build, demonstrating how good it gets when form truly follows function!
Design |
Single high-excursion driver, sealed enclosure, patented built-in Ultra-Class-D™ power amplifier, USB port |
Amplifier |
1,700 watts Dynamic Peak / 850 watts RMS |
Amplifier Features |
Auto-On / Off, Trigger On / Off, soft clipping, electrical shorting protection, thermal protection |
Room Correction |
Paradigm Perfect Bass Kit™ (sold separately) |
Low Pass Filter Frequency |
Variable 35 Hz - 150 Hz; Bypass Option |
Low Frequency Driver |
254-mm (10 in) high-excursion mineral-filled co-polymer polypropylene cone with RCR™ resonance-control ribbing on underside, FEA-optimized overmolded, inverted Santoprene® surround, 38-mm (1-1/2 in) diameter split voice-coil construction (60-mm coil lengths), dual Nomex® spiders, high-temperature Apical™ formers, dual 12-mm-thick top plates, 10-lb (4.5 kg) triple ceramic (hard ferrite) magnet structure, AVS™ die-cast heatsink chassis |
Low Frequency Extension |
18 Hz (DIN) |
Sub / Sat Phase Alignment |
Variable 0° - 180° |
Sensitivity Room / Anechoic |
100 mV mono / |
Impedance |
RCA: 10k ohms; XLR: 20k ohms |
Finishes |
Satin Black |
Inputs |
RCA (S/E) Left and Right or Sub-Out / LFE or Balanced XLR. From Sub-Out / LFE-Out of preamp, processor or other line-level source |
Weight |
37 lbs. (16.8 kg) |
Dimensions HxWxD |
13.5" × 13.75" × 12.5625" |